Salt-sprayed glove production generates typical high-salinity wastewater mixed with latex residues, emulsifiers, curing agents, suspended solids and abundant dissolved salts. The high TDS level is the biggest challenge: ordinary activated sludge bacteria will be inhibited or deactivated under high salinity, making conventional biochemical systems fail to stabilize COD and ammonia nitrogen removal. Improper discharge will violate local environmental regulations and bring heavy fines for glove manufacturers.
A reliable treatment system follows a combined route: pretreatment → salt-tolerant biochemical treatment → advanced polishing → desalination and brine disposal. The pretreatment stage adopts equalization tank, coagulation sedimentation and dissolved air flotation to remove latex colloid, floating solids and part of organic pollutants. This step protects the downstream biochemical pool and membrane modules from fouling and shock load.
The core of the whole system is the salinity-adapted biochemical unit. Instead of common microbial strains, we select and domesticate salt-tolerant microorganisms through gradient salinity acclimation. MBBR is widely preferred here for its strong shock resistance and stable sludge performance under fluctuating salt concentration. After biochemical degradation, the effluent enters advanced treatment including ultrafiltration and reverse osmosis for desalination.
The concentrated brine produced by RO is the key difficult stream. For factories with strict zero-liquid-discharge requirements, MVR evaporation and crystallization are adopted. Clean distillate can be recycled back to the production line for glove washing, while crystalline salt can be separated for resource recovery or compliant disposal. If local discharge standards allow partial brine release, the system can be optimized to cut energy and chemical costs.
Many glove plants encounter frequent troubles such as membrane scaling, sludge loss and unstable effluent quality. These problems usually come from insufficient pretreatment, unreasonable salinity gradient and lack of online monitoring. We suggest installing online sensors for pH, COD, TDS and turbidity, with automatic chemical dosing and early warning functions. Regular maintenance of membrane cleaning and sludge testing is also necessary for long-term stable operation.
Guangbo Environmental specializes in customized wastewater treatment solutions for salt-sprayed glove and nitrile glove factories. We evaluate daily water volume, raw wastewater quality, local emission limits and reuse demands before designing the process. Our solutions balance capital investment, power consumption and chemical dosage, supporting both standard discharge and water recycling to reduce freshwater cost.
If you run a salt-sprayed glove plant and look for high-salinity effluent treatment technology, feel free to contact us for technical proposal, site assessment and quotation.
