Packaging Paper Wastewater Treatment: Process Selection & Water Reuse Solutions

Nov 19, 2026

Leave a message

Packaging paper and corrugated board manufacturing consumes large volumes of process water and generates high-strength wastewater rich in cellulose fibers, starch, ink residues, suspended solids, COD and BOD. If discharged directly without proper treatment, the effluent will cause serious water pollution and fail to meet local environmental discharge standards. For recycled packaging paper mills, wastewater quality fluctuates frequently due to variable waste paper raw materials, which brings higher requirements for stable treatment systems.

A mature packaging paper wastewater treatment project usually adopts a combined "pretreatment + biological treatment + advanced polishing" route. The pretreatment stage uses screening, air flotation and coagulation sedimentation to remove most fibers, suspended solids and colloidal substances. This step protects the subsequent biological units from blockage and organic shock load. For high-COD wastewater from recycled pulp lines, anaerobic reactors such as UASB or EGSB are widely applied to cut organic loads and recover biogas for energy saving.

After anaerobic treatment, aerobic biological processes including activated sludge, MBBR and SBR further degrade soluble organic pollutants. This core biochemical section is the key to stable COD and BOD removal. Many packaging mills also add tertiary polishing units: chemical oxidation, filtration or membrane systems to reduce color and residual contaminants. Treated water can be reused for pulp washing, cooling water or site irrigation, helping factories cut freshwater intake and wastewater discharge fees.

Many paper mill owners only focus on effluent compliance while ignoring long-term operation stability. Fiber accumulation, sludge bulking, ink toxicity and scaling are common operational troubles. A well-designed system should reserve buffer capacity, install online monitoring instruments for COD, pH and turbidity, and support automatic chemical dosing. Proper sludge dewatering is also essential to reduce waste disposal cost.

As an environmental engineering supplier specializing in industrial wastewater treatment, Guangbo Environmental provides customized ETP solutions for packaging paper and corrugated mills. We tailor the process flow according to daily water volume, raw wastewater quality and local emission limits. Our solutions balance investment cost, power consumption and chemical dosage, and support water reuse to help customers achieve sustainable production.

If you are looking for reliable wastewater treatment technology for packaging paper production lines, welcome to contact us for technical proposal and quotation.

Send Inquiry
Send Inquiry